耐寒输送带
Cold Resistant Conveyor Belt
特点：用棉帆布、尼龙帆布或聚酯帆布做带芯，覆盖胶采用天然橡胶与顺丁橡胶的并用胶，具有弹性高、耐冲击、耐寒冷
等特点，能在零下40℃的环境下正常使用。
用途：适用于寒冷地区露天或冷冻仓库等场合输送物料。
技术指标：1、耐寒输送带根据覆盖胶性能分为耐划裂型（H )、耐磨损型（D )、一般型（L )三种类型。
2.根据耐寒性能分为C1和C2两种级别。C1使用环境温度为-45℃ 〜 +50℃ ；C2使用环境温度为-60℃〜+50℃。
Characteristics: it use cotton canvas, nylon canvas or EP canvas as the carcass. Cover rubber selects a blend
of NR and BR, Which has the property of high elasticity, shock resistance, cold resistance etc. It can work normally under
the conditions of -40℃
Aplication: It is suitable for conveying materials outdoors in freezing area, cold strage etc.
Technical index: 1. Cold resistant conveyor belt can be divided into three types according to the properties of cover;
Laceration resistance type(H), Anti-abrasive type(D), Ordinary type(L).
2.According to the different cold resistance, it can be divied into two types of C1 and C2, C1: working temperature:
-45℃〜+50℃ C2 working temperature -60℃〜+50℃。
耐寒输送带
Cold Resistant Conveyor Belt
特点：用棉帆布、尼龙帆布或聚酯帆布做带芯，覆盖胶采用天然橡胶与顺丁橡胶的并用胶，具有弹性高、耐冲击、耐寒冷
等特点，能在零下40℃的环境下正常使用。
用途：适用于寒冷地区露天或冷冻仓库等场合输送物料。
技术指标：1、耐寒输送带根据覆盖胶性能分为耐划裂型（H )、耐磨损型（D )、一般型（L )三种类型。
2.根据耐寒性能分为C1和C2两种级别。C1使用环境温度为-45℃ 〜 +50℃ ；C2使用环境温度为-60℃〜+50℃。
Characteristics: it use cotton canvas, nylon canvas or EP canvas as the carcass. Cover rubber selects a blend
of NR and BR, Which has the property of high elasticity, shock resistance, cold resistance etc. It can work normally under
the conditions of -40℃
Aplication: It is suitable for conveying materials outdoors in freezing area, cold strage etc.
Technical index: 1. Cold resistant conveyor belt can be divided into three types according to the properties of cover;
Laceration resistance type(H), Anti-abrasive type(D), Ordinary type(L).
2.According to the different cold resistance, it can be divied into two types of C1 and C2, C1: working temperature:
-45℃〜+50℃ C2 working temperature -60℃〜+50℃。
耐酸碱输送带
Acid/Alkali Resistant Conveyor Belt
适用于和酸碱接触的工作环境，如磷肥制造、海水晒盐。覆盖胶采用橡塑共混并
耐酸碱性优异的惰性材料，比氯丁橡胶耐酸碱输送带性能更优。骨架材料采用EP帆
布，比棉布芯耐酸碱性能更加可靠。一般做成环形。
Suitable for Acid/Alkli working environment ,Such as phosphate fertilizer manufacturing, sea salt production .
Plastic cover using rubber blends excellent acid and inert material, better than neoprene acid conveyor performance. Frame material used EP canvas and more reliable than cotton core acid properties. Usually made of a ring.
cotton canvas .Generally make into annularly .
耐酸碱输送带覆盖层耐酸碱性能见下表：
The conveyor belt performance of acidproof alkali is acidproof andalkaine can see the following form:
耐酸碱输送带覆盖胶物理机械性能如下表：
The conveyor belt performance of acidproof alkali sees the follow form:
| 项目 | 拉伸强度MPa≥ | 拉断伸长率%≥ | 磨耗量mm3≥ | 硬度 |
| Project | Draw the intensity | Break entension | Wearing and tearing | Hardness |
| 老化前性能 Performance before wearing out | 14.0 | 400 | 250 | 60 |
| 老化后性能 Performance after wearing out | 12.0 | 340 | - | 65 |
注：当覆盖层厚度为0.8-1.6mm时，试样厚度可以是切出的厚度，此时，拉伸强度和拉断伸长率允许比表中值低15%以内
Note:trail thick will be the max thick when the layer thick with 0.8-1.6mm, meanwhite the intensity draw and break extension rate lower within 15% compared
耐油输送带
Oil resistant Conveyor Belt
覆盖胶采用高丙烯腈含量的丁腈胶为主体材料，采用帆布，尼龙帆布或聚脂帆布为强力层。
适用于输送含油物料或接触各种工作油的环境中。具体有体积变化率低，强度保持高，使用范围广等优点。
Cover rubber with high acrylonitrile content of nitrile rubber as the main material, the use of canvas, nylon canvas or polyester canvas as a strong layer.
For conveying various oily materials or contact with the working oil environment. There are specific low volume change, to maintain a high intensity, using a wide range of advantages.
耐油输送带覆盖胶物理机械性能如下表：
Oil-resistance conveyor belt and cover glue physics mechanical performances as follow:
| 类型 | 拉断强度/MPa | 拉断伸长率/% | 磨耗量/mm3 |
| Type | Tensile strength/Mpa | Break elongation/% | Abrasion |
| LO | ≥14.0 | ≥350 | ≤200 |
| DO | ≥16.0 | ≥350 | ≤160 |
注：LO-—般条件下的耐油输送带；DO-强耐磨损耐油工作条件下的输送带。
Note: LO-Oil-resistance convey under the general condition; DO-strong hard-wearing conveyor belt which is able to bear the oil resistance of work.
普通输送带对各种油类、有机溶剂的忍耐性比较差。运输含油类的物料时，由于油类对带体面胶具有溶胀性、侵蚀性，使面胶体积增大，结构松弛，物理机械性能下降，产品使用寿命缩短。
耐油输送带由全棉帆布、尼龙帆布、聚酯帆布，经过压延、成型、硫化等工序精制而成，具有比较好的耐油性，适合于输送含油物料，以及一些可能出现油性、化学溶剂的场合使用
耐灼烧输送带 Burning Resistant Belt
用途：广泛应用于冶金、铸造、水泥、化工等行业。输送
物料的温度可达到200-600℃.瞬间可达800℃ .
Widely used in metallurgy、 foundry、 cement、
chemical industries , etc. the temperature of conveying
belt material reaches 200-600 centi degrees, the
instant temperature can reach 800 centi degrees.
特点：1、近工作面强力层上方覆盖一层特制耐热织物(GF帆布），强力层采用髙模低缩聚酯
帆布(D.S.EP帆布）
2、覆盖层胶料配方独特.在输送高温物料时，表面形成绝热炭化层。
3、优异的贴胶配方，保证在高温条件下，布层间具有较高附着力.避免使用过程中
出现胶层起泡等弊病，稳定性好.使用寿命长。
characteristic: 1. Near the surface of the layer there is covered with a layer of powerful special
heat-resistant fabric (GF canvas), high-strength low-shrinkage polyester canvas
mode (DSEP canvas).
2.Rubber coating formula is unique,
When conveying high-temperature materials, thermal insulation charring layer formed on the surface
3, excellent gum paste formulation, ensuring high temperatures, has high adhesion between the fabric layers. Avoid using process
Layer appears blistering and other ills, good stability and long service life.
耐灼烧输送带 Burning Resistant Belt
用途：广泛应用于冶金、铸造、水泥、化工等行业。输送
物料的温度可达到200-600℃.瞬间可达800℃ .
Widely used in metallurgy、 foundry、 cement、
chemical industries , etc. the temperature of conveying
belt material reaches 200-600 centi degrees, the
instant temperature can reach 800 centi degrees.
特点：1、近工作面强力层上方覆盖一层特制耐热织物(GF帆布），强力层采用髙模低缩聚酯
帆布(D.S.EP帆布）
2、覆盖层胶料配方独特.在输送高温物料时，表面形成绝热炭化层。
3、优异的贴胶配方，保证在高温条件下，布层间具有较高附着力.避免使用过程中
出现胶层起泡等弊病，稳定性好.使用寿命长。
characteristic: 1. Near the surface of the layer there is covered with a layer of powerful special
heat-resistant fabric (GF canvas), high-strength low-shrinkage polyester canvas
mode (DSEP canvas).
2.Rubber coating formula is unique,
When conveying high-temperature materials, thermal insulation charring layer formed on the surface
3, excellent gum paste formulation, ensuring high temperatures, has high adhesion between the fabric layers. Avoid using process
Layer appears blistering and other ills, good stability and long service life.
